amiciSmart Solar Charger Controller 10A, Intelligent Battery Regulator for Solar Panel LCD Display with USB Port 12V/24V (10A)

Market Place


Price: ₹ 3,000.00 - ₹ 729.00
(as of May 06,2021 23:08:30 UTC – Details)


Product Description

11

22

Features

Over Current Protection
Over Discharge Protection
Short-Circuit Protection
Over Charge Protection
Reverse Protection
Open Circuit Protection

3

3

4

4

5

5

Supreme Quality

High quality International Grade Chip ensure stable run in cold/hot temperature and humid environment.

LED Display

Set and check the readings on LED display with ease.

Dual USB Ports

Digital standard USB port.

99

USB Charging

It supports most USB port devices available in the market i.e. mobile phones, tablets, Bluetooth headsets, etc.

This allows us to charge digital product any time.

88

Controller Rating

10A

20A

30A

50A

60A

Controller Voltage

12V/24V DC

12V/24V DC

12V/24V DC

12V/24V DC

12V/24V DC

Max. Battery Current Capacity

Unlimited

Unlimited

Unlimited

Unlimited

Unlimited

Battery Voltage

12V/24V

12V/24V

12V/24V

12V/24V

12V/24V

Max. Charging Current

10A

20A

30A

50A

60A

Max. Load Current

10A

20A

30A

50A

60A

USB Port

Max. Current Supported by USB Port

2A

2A

2A

2A

2A

Max. Solar Panel Capacity in 12V

120 W

240 W

360 W

600 W

720 W

Max. Solar Panel Capacity in 24V

240 W

480 W

720 W

1200 W

1440 W

With Overload protection, short circuit protection, open-circuit protection and reverse protection, the device will protect your battery and will increase the battery life.
amiciSmart Solar charge controller work with 12v and 24v panel, you can set float voltage (Float voltage is max battery charge voltage), discharge reconnect (Load on after this voltage), discharge stop (Load OFF on this voltage) and work mode (When you set hours setting then load ON after sunset automatic).
Suitable for lead-acid batteries(OPEN, AGM, GEL) and not for nickel hydride, lithium, Li-ions, or other batteries. the device should be connected to the panel and battery both for the device to be working.
Note:- When connecting the controller to the battery make sure that the battery should be atleast 10.7V charged.



Leave a Reply

Your email address will not be published. Required fields are marked *